Motherboard (w/Raspberry-Pi, Soft, and ADCS-controller)

Purpose:

Designed for control of satellite with ADCS. Provides satellite stabilization and target algorythms performance, as well as three-axial orientation and stabilization system algorythms.

Year of release: 2018

Guaranteed service life (years): 1

Estimated production / delivery time (months): 2

Flight qualification of the product: No

Possibility to adapt the product to customer requirements: No

Parameter	Value
Dimensions (w/p PC104 connector), mm	86.2 х 93.6 х 14
Mass, g	60
Supply voltage, V	5..14
Power consumption, max (ADCS and loaded RPi (w/o WiFi), W	1.7
Data interface	CAN2.0B Raspberry: Camera I/F, UART, I2C, SPI (2 CS), USB
Operating temperature range, °С	-40...+60
Storage temperature range, °С	-50..+105
Mechanical vibration, g	12
Mechanical shock, g	50

Description

Represents a Raspberry-Pi Compute Module carrier which contains a set of devices. Features: - flat and flexible architecture: all devices have CAN bus interconnect; - raspberry Compute Module CM1/CM3 slot; - sensors on CAN bus: magnetometer, angular veloci

... Represents a Raspberry-Pi Compute Module carrier which contains a set of devices.
Features:
- flat and flexible architecture: all devices have CAN bus interconnect;
- raspberry Compute Module CM1/CM3 slot;
- sensors on CAN bus: magnetometer, angular velocity, temperature, voltages and cur-rents;
- EM torquer driver;
- on board ADCS controller;
- low-power board managing MCU with B-DOT and flight plan;
- bootloaders with in-flight flash abilitu;
- rich centralized satellite debug system.

Product guide

Motherboard (w/Raspberry-Pi, Soft, and ADCS-controller)

Motherboard (w/Raspberry-Pi, Soft, and ADCS-controller)

Description